洋马 AC-10V

Full-time 4WD & front wheel differential lock

The four-wheel drive utilizes the engine's power without loss, allowing it to powerfully till even soft fields. The front wheels are equipped with a differential lock, so the front wheels do not spin even in muddy conditions, making it easy to turn.

Side clutch linked round handle

In addition to being as small as a tiller, when you turn the handlebars fully, the side clutch engages and the machine turns in a small radius. This small turning radius is very useful in small fields where you need to turn a lot.

Forward/reverse clutchless

You can switch between forward and reverse motion without using the clutch by simply tilting the lever forward or backward, making it easy to operate in narrow fields or on pillow areas where forward and backward motion is required frequently.

Universal Design

The nameplate around the operating lever has large letters, and the levers and knobs are color-coded according to their purpose for an easy-to-understand design. Even those with no experience of driving a tractor, elderly people, and women can operate it easily and effortlessly.

Backup Mechanism

To prevent forgetting to raise the rotary when reversing, a backup mechanism is used that automatically raises the rotary when the lever is put into "reverse." Moreover, the rotary up/down lever and rotary clutch lever are arranged in parallel. It is an easy-to-use design.

Easy to attach and detach, making it easy to change the work equipment

Simply ① hook it onto the hook, ② lock it, and ③ attach the gear change case. The rotary can be easily attached and detached, and it can be quickly replaced with other work equipment.

Can be operated even when dismounted

You can operate the vehicle while dismounting and holding the handlebars, or even while walking, making it easy to enter and exit fields, cross ridges, and load and unload trucks.

Inner ridge construction (mulch)

Small ridge

Compatible Crops

Potatoes, sweet potatoes, taro, etc.

Small ridge shaping mulch UMS-110A

• *Cross Center Rotary AR100,A

Double variable small ridge rotary AGR-B3D,SKB

• *To install on Agrica, "Gear change case C-A10,RB" is required.
• *Multi sold separately.

Flat ridge

Compatible Crops

Spinach, lettuce, onion, daikon, etc.

Double variable flat ridge shaping rotary AGR-F15D,SKB

Double variable flat ridge shaping rotary AGR-F18CNA,SKBH

• *To install on Agrica, "Gear change case C-A10,RB" is required.
• *Multi sold separately.

Flat high ridges

Compatible Crops

Lettuce, cabbage, broccoli, onions, Chinese cabbage, carrots, etc.

Double variable flat height ridge shaping rotary AGR-E15D,SKB

Variable height ridge shaping rotary AGR-E18C,SKBH

• *To install on Agrica, "Gear change case C-A10,RB" is required.
• *We recommend using the "Rotor Bearing Set" with the AGR-E15D.
• *Multi sold separately.

Flat and high shaping multi UMPH-110A

"Double variable shaping rotary" that can take the optimal posture according to ridge height and field conditions

• Because it is adjustable, it can take the optimal posture according to the height of the ridges and field conditions, allowing for less power and more efficient work.
• The posture of the shaping machine can be easily adjusted using the handle, so the tines are less likely to wear out even if field conditions change, and it produces beautiful ridges.
• It is shipped assembled, so there is no need for assembly. You can start working immediately after unpacking and installing the unit.

Shaper angle adjustable handle

The variable range of the "variable handle" has been increased by approximately 4 degrees in an arc, making it even easier to adjust the amount of soil. By simply turning the handle, the position changes, making it easy to change the amount of soil being picked up.

1) When the amount of soil is small and the center of the ridge becomes concave

Adjust the orientation of the shaping machine so that it points downwards.

② When the amount of soil is large and the horsepower is reduced or the movement is slow.

Adjust your posture so that you lean backwards.

Double variable mechanism

The shaper can be bent by about 3 degrees, allowing for final adjustment when the "variable handle" alone is not enough to adjust the soil volume. By adjusting the soil volume to the optimum level, tight ridges are created and drainage is improved. It also makes it easier to lay mulch neatly.

A variety of optional attachments

Tillage

Compatible Crops

Rice, vegetables in general, fruit trees

Cross Center Rotary

AR90,A Tillage width: 90cm
AR100,A Tillage width: 100cm

Tail wheel kit AR100

(7B1300-25310)

Plowing

Compatible Crops

Rice

Harrow AH130C,DRHA

• *To install on the Agrica, a separate "gear change case AR (7A6470-26710)" is required (the gear change case included with the Cross Center Rotary AR series can be used).

Rotary tiller

Compatible Crops

soy

Black soybean inter-cultivation rotary set

Rotary tiller A10 (forward rotation 2-speed) RB400A,CRTH
+ Black soybean claw shaft set UP
+ Variable speed case C-A10,RB
+ Black soybean outer piling plate 24P

Weeding

Compatible Crops

Fruit trees

Spiral Rotor A10

• *Cross center rotary for AR100,A

harvest

Compatible Crops

Potato

Excavator P501D,HTKH

+ Excavator mounting parts A10 (PTO1, ZZZ)
+ Excavator hitch A10

Specifications:

name			Yanmar Agrica
Sales model name			A-10V				A-10VL (low floor model)
Classification			A	W.A.	10A	W10A	A	10A
Aircraft dimensions	Overall length (mm)		1830		2295		1830	2295
	Overall width (mm)		910	940	1140		910	1140
	Overall height (mm)		1670		1670		1023	1023
	Minimum ground clearance (mm)		320		320		260	260
Aircraft mass (kg)			302	307	365	370	297	360
engine	Model name		L100V
	kinds		Vertical air-cooled 4-stroke diesel
	Total displacement (L)		0.435
	Power/rotation speed (kW {PS}/rpm)		6.2{8.4}/3600
	Maximum output (kW {PS})		6.8{9.3}
	Fuel used		Diesel fuel
	Fuel tank capacity (L)		11.0
	Starting method		Starter type
Running Part	tire	front wheel	4.00-9 (Φ445)				4.00-7 (Φ400)
		Rear wheel	4.00-16 (Φ650)	6-14	4.00-16 (Φ650)	6-14	6-10 (Φ550)
	Wheelbase (mm)		820	820	820	820	820	820
	Wheelbase	Front wheel (mm)	610		610		619	619
		Rear wheel (mm)	615	678	615	678	705～805
	Clutch type		Wet multi-plate
	Brake Type		Wet Disc
	Drive system		Four-wheel drive
	Gear shifting method		Continuous + Select + Multi-plate clutch
	Number of gears (steps)		6 forward, 6 reverse
	Ground speed	Forward (km/h)	0.56 to 6.3				0.47 to 5.3
		Reverse (km/h)	0.52–5.9				0.44 to 4.9
	Minimum turning radius (m)		1.2
PTO	Number of steps (steps)		1
	Rotational speed (rpm)		766
Work equipment lifting device	Control Method		Auto				Auto/Hydraulic
	Wearing Method		2P
rotary	Model name		-		AR100		-	AR100
	Drive system		-		Cross Center		-	Cross Center
	Cultivation width (mm)		-		1000		-	1000
	Claw rotation radius (mm)		-		190		-	190

• *Please note that the values ​​vary depending on the specifications.
• *Specifications may be changed without notice due to improvements, etc.