Skip to product information
1 of 6

Innovative-Agri

Yanmar A-10V

Yanmar A-10V

Regular price $9,118.00 USD
Regular price Sale price $9,118.00 USD
Sale Sold out
Yanmar AC-10V

It's low, so it's easy to ride. Even the elderly and women can ride with ease!

When walking becomes difficult, riding is the best way to do the work.
The Agrica has a low step that makes it easy to get on and off, and a low driver's seat that makes it easy to see ahead and drive. Even elderly people and women can get on easily.

Step height 40cm: As low as one step on a slightly higher staircase. Seat height 71cm: As low as a bicycle saddle.

 

Maintain constant tillage depth

Nameraka Auto (automatic tillage depth control device)

Even if the field is uneven, the rotary is automatically controlled to keep the tilling depth constant. The smooth response is better than a tiller and the tilling work is finished beautifully.

More power and better fuel economy

Air-cooled diesel 9.3 horsepower

Equipped with a powerful, fuel-efficient air-cooled diesel engine, it can work comfortably even in wet fields.

Engine image

Wheel width equivalent to that of a tiller

The tread is 635mm, the same as that of a tiller, so it can travel on the same roads as before.

  • *Mirror horn is standard equipment.

Equipped with a large capacity 11L fuel tank

It can work continuously for 5 hours.

Smooth operation even in soft fields

Full-time 4WD & front wheel differential lock

The four-wheel drive utilizes the engine's power without loss, allowing it to powerfully till even soft fields. The front wheels are equipped with a differential lock, so the front wheels do not spin even in muddy conditions, making it easy to turn.

  • *The image is of the old model.

Easy to maneuver and turn easily

Side clutch linked round handle

In addition to being as small as a tiller, when you turn the handlebars fully, the side clutch engages and the machine turns in a small radius. This small turning radius is very useful in small fields where you need to turn a lot.

Easy forward/reverse switching

Forward/reverse clutchless

You can switch between forward and reverse motion without using the clutch by simply tilting the lever forward or backward, making it easy to operate in narrow fields or on pillow areas where forward and backward motion is required frequently.

Large, easy to read characters and color-coded levers for easy understanding

Universal Design

The nameplate around the operating lever has large letters, and the levers and knobs are color-coded according to their purpose for an easy-to-understand design. Even those with no experience of driving a tractor, elderly people, and women can operate it easily and effortlessly.

No need to be careful when reversing

Backup Mechanism

To prevent forgetting to raise the rotary when reversing, a backup mechanism is used that automatically raises the rotary when the lever is put into "reverse." Moreover, the rotary up/down lever and rotary clutch lever are arranged in parallel. It is an easy-to-use design.

Photo of the lever area

Easy to attach and detach, making it easy to change the work equipment

Simply ① hook it onto the hook, ② lock it, and ③ attach the gear change case. The rotary can be easily attached and detached, and it can be quickly replaced with other work equipment.

Can be operated even when dismounted

You can operate the vehicle while dismounting and holding the handlebars, or even while walking, making it easy to enter and exit fields, cross ridges, and load and unload trucks.

Supporting labor-saving in field farming. Riding the Agrica makes ridge building easy!

The compact Agrica now makes it easy to make small ridges, flat ridges, and high ridges. It features easy-to-get-in and -out steps and a low driver's seat that provides good visibility ahead and makes driving easy. The peace of mind of being able to operate the machine even when out of the vehicle helps to reduce the labor required for field farming.

  • *This machine is an older model.

Inner ridge construction (mulch)

Small ridge

Compatible Crops

Potatoes, sweet potatoes, taro, etc.

Small ridge shaping mulch UMS-110A

  • *Cross Center Rotary AR100,A

Double variable small ridge rotary AGR-B3D,SKB

Small ridge shape
  • *To install on Agrica, "Gear change case C-A10,RB" is required.
  • *Multi sold separately.

Flat ridge

Compatible Crops

Spinach, lettuce, onion, daikon, etc.

Double variable flat ridge shaping rotary AGR-F15D,SKB

Flat ridge shape

Double variable flat ridge shaping rotary AGR-F18CNA,SKBH

Flat ridge shape
  • *To install on Agrica, "Gear change case C-A10,RB" is required.
  • *Multi sold separately.

Flat high ridges

Compatible Crops

Lettuce, cabbage, broccoli, onions, Chinese cabbage, carrots, etc.

Double variable flat height ridge shaping rotary AGR-E15D,SKB

Flat high ridge shape

Variable height ridge shaping rotary AGR-E18C,SKBH

Flat high ridge shape
  • *To install on Agrica, "Gear change case C-A10,RB" is required.
  • *We recommend using the "Rotor Bearing Set" with the AGR-E15D.
  • *Multi sold separately.

Flat and high shaping multi UMPH-110A

Flat high ridge shape

"Double variable shaping rotary" that can take the optimal posture according to ridge height and field conditions

  • Because it is adjustable, it can take the optimal posture according to the height of the ridges and field conditions, allowing for less power and more efficient work.
  • The posture of the shaping machine can be easily adjusted using the handle, so the tines are less likely to wear out even if field conditions change, and it produces beautiful ridges.
  • It is shipped assembled, so there is no need for assembly. You can start working immediately after unpacking and installing the unit.

Shaper angle adjustable handle

The variable range of the "variable handle" has been increased by approximately 4 degrees in an arc, making it even easier to adjust the amount of soil. By simply turning the handle, the position changes, making it easy to change the amount of soil being picked up.

1) When the amount of soil is small and the center of the ridge becomes concave

Adjust the orientation of the shaping machine so that it points downwards.

② When the amount of soil is large and the horsepower is reduced or the movement is slow.

Adjust your posture so that you lean backwards.

Double variable mechanism

The shaper can be bent by about 3 degrees, allowing for final adjustment when the "variable handle" alone is not enough to adjust the soil volume. By adjusting the soil volume to the optimum level, tight ridges are created and drainage is improved. It also makes it easier to lay mulch neatly.

Just loosen it. The soil will decrease at hole A. The soil will increase at hole B.
Just loosen it. The soil will decrease at hole A. The soil will increase at hole B.

A variety of optional attachments

Tillage

Compatible Crops

Rice, vegetables in general, fruit trees

Cross Center Rotary

AR90,A Tillage width: 90cm
AR100,A Tillage width: 100cm

Tail wheel kit AR100

(7B1300-25310)

Work example photos
  • *The image of this unit is of an older model.
Work example photos
  • *The image of this unit is of an older model.

Plowing

Compatible Crops

Rice

Harrow AH130C,DRHA

  • *To install on the Agrica, a separate "gear change case AR (7A6470-26710)" is required (the gear change case included with the Cross Center Rotary AR series can be used).
Harrow AH130C, DRHA photo
Work example photos
  • *The image of this unit is of an older model.

Rotary tiller

Compatible Crops

soy

Black soybean inter-cultivation rotary set

Rotary tiller A10 (forward rotation 2-speed) RB400A,CRTH
+ Black soybean claw shaft set UP
+ Variable speed case C-A10,RB
+ Black soybean outer piling plate 24P

  • *Black soybean outer shaping plate 24P

Weeding

Compatible Crops

Fruit trees

Spiral Rotor A10

  • *Cross center rotary for AR100,A
Spiral rotor A10 photo
Work example photos
  • *The image of this unit is of an older model.

harvest

Compatible Crops

Potato

Excavator P501D,HTKH

+ Excavator mounting parts A10 (PTO1, ZZZ)
+ Excavator hitch A10

Excavator photo
Specifications:
name Yanmar Agrica
Sales model name A-10V A-10VL (low floor model)
Classification A W.A. 10A W10A A 10A
Aircraft dimensions Overall length (mm) 1830 2295 1830 2295
Overall width (mm) 910 940 1140 910 1140
Overall height (mm) 1670 1670 1023 1023
Minimum ground clearance (mm) 320 320 260 260
Aircraft mass (kg) 302 307 365 370 297 360
engine Model name L100V
kinds Vertical air-cooled 4-stroke diesel
Total displacement (L) 0.435
Power/rotation speed (kW {PS}/rpm) 6.2{8.4}/3600
Maximum output (kW {PS}) 6.8{9.3}
Fuel used Diesel fuel
Fuel tank capacity (L) 11.0
Starting method Starter type
Running Part tire front wheel 4.00-9 (Φ445) 4.00-7 (Φ400)
Rear wheel 4.00-16 (Φ650) 6-14 4.00-16 (Φ650) 6-14 6-10 (Φ550)
Wheelbase (mm) 820 820 820 820 820 820
Wheelbase Front wheel (mm) 610 610 619 619
Rear wheel (mm) 615 678 615 678 705~805
Clutch type Wet multi-plate
Brake Type Wet Disc
Drive system Four-wheel drive
Gear shifting method Continuous + Select + Multi-plate clutch
Number of gears (steps) 6 forward, 6 reverse
Ground speed Forward (km/h) 0.56 to 6.3 0.47 to 5.3
Reverse (km/h) 0.52–5.9 0.44 to 4.9
Minimum turning radius (m) 1.2
PTO Number of steps (steps) 1
Rotational speed (rpm) 766
Work equipment lifting device Control Method Auto Auto/Hydraulic
Wearing Method 2P
rotary Model name - AR100 - AR100
Drive system - Cross Center - Cross Center
Cultivation width (mm) - 1000 - 1000
Claw rotation radius (mm) - 190 - 190
  • *Please note that the values ​​vary depending on the specifications.
  • *Specifications may be changed without notice due to improvements, etc.
View full details